APF-3002 in the USA

The first PET Technologies automatic blowing machine was put into operation in the USA at the end of June.

The new ground breakerwas the automatic blowing machine APF-3002 with 3000 bph output and a bottle volume up to 3 liters, which was sold with 3 blow molds to a client from Arizona.

Cooperation with the company began at  PACK EXPO Las Vegas 2017 in September last year. Key feature of the project is a unique PET bottle design developed by the client and executed by PET Technologies R&D Department. Engineers have designed a blow mold with a number of special inserts that provide design flexibility of the blown bottle – manufacturer can easily change the design of the bottle simply by replacing the insert elements.

APF-3002 and blow molds fulfilled all the customer’s wishes, therefore the cooperation of the two companies will continue in the future.

Post date. 7-16-2018

PET Technologies at EXPO PACK México 2018: record numbers

“EXPO PACK Mexico 2018 closes as the largest event in the history”, highlights the organizing committee of the event. Over 170 guests visited PET Technologies booth at EXPO PACK Mexico 2018, according to the statistics.

Environment. Always full of people interested in PET stretch blow molding solutions. Interest towards the machine we showcase and new products we are about to launch. Fascinated by the 4thgeneration of the automatic PET stretch blow molding machines APF-Max. This is the atmosphere at PET Technologies booth 2350.

Solutions. At the booth we exhibited automatic PET stretch blow molder APF-6004 with output 6000 bph, 0.2 – 2.0 L. This 4-cavity blow molder has already found its final destination in Mexico! It is Recipientes y Empaques de México S.A. de C.V. plant. Our guests highly appreciated the molds we produce. “What a fine finish!”, they exclaimed.

Interest. But for the mentioned equipment, there was interest towards blow molding solutions for 3 – 10 l bottles as well as for PET keg and 5 US gallon water cooler bottles. Transparent and returnable, with or without handle, economic with prefab neck finish. It is PET water cooler bottle that can be produced at automatic blow molder APF-30.

Resume. This is the third time PET Technologies participates at EXPO PACK with over 23000 visitors. Traditionally we were together with local representatives. This is the second time we exhibit the equipment already sold in Mexico. Last year it was automatic blow molder APF-3002. This is the first time we present the latest developments and achievements.


Thank you for sharing your projects and ideas with us!

Post date. 6-15-2018

PET Technologies Debut at NPE2018

“When you are playing an exhibition, you are kind of letting everyone get an opportunity” – said Canadian professional hockey player and entrepreneur Wayne Gretzky.

The quote reflects PET Technologies vision. This year for the first time ever we showcase our advanced technology at NPE2018. It is an integral part of our expansion towards North America and Latin America.

What did we exhibit? Our guests saw automatic PET stretch blow molding machine APF-3002 already sold in the USA. We brought it to Arizona after the event. This model with output 3000 bph, 0.2 – 2.0 l has high demand among PET bottles manufactures in Europe, Asia, North and Latin America.

Who were our guests? The main guests of the event were our customers and prospects, partners and representatives from North and South America, Europe, Asia and Africa. Some of them already familiar with the technology PET Technologies implement, other are getting acquainted with it now.

What are the advantages of PET Technologies equipment? Blow mold quick change permits you to start another bottle format in just a few minutes. The wide geography of sales and service centers guarantees the stable operation of your plant. You can easily blow mold asymmetric bottles with original design!

Why do the 4th generation of PET Technologies equipment arouse interest? We present the last generation of PET stretch blow molders APF-Max with output up to 14 000 bph to produce 0.2 – 3.0 l bottles. Its flexibility and modular system permit you to buy 4-cavity machine and then increase it up to 8 cavities! Sounds incredible, doesn’t it?

Let’s sum up?NPE2018, where PET Technologies debuted, was an opportunity to meet with each of you. Our visitors and guests got acquainted closer with PET Technologies blow molding machines and found optimal solution.

Seeing is believing!

Post date. 5-25-2018

PET Technologies at Leading Latin American Plastics Industry Magazine

“PET Technologies continues its expansion towards the American continent and participates at NPE2018”, highlights Ambiente Plástico magazine in its last issue.

The article provides an overview of PET Technologies participation at NPE2018, one of the most important event for plastics industry both in North and South America. It is celebrated every 3 years in Orlando, the U.S.

The editor emphasizes that we showcase automatic PET stretch blow molder APF-3002 with output 3000 bph, 0.2 – 2.0 l. On the other hand, we present the 4th generation of linear automatic blow molding machines APF-Max with output 7000 – 14000 bph, 0.2 – 3.0 L.


Source: Ambiente Plástico

Issue 86, April– May 2018

Post date. 5-18-2018

Tecnología del Plástico publishes an overview of PET Technologies participation at NPE2018

This year PET Technologies brings its technology to NPE2018, the world´s leading plastics trade show and conference. Our Booth S10057 is located at “Bottle Zone”. This area is for everyone involved in bottles production process.

A leading Latin American magazine Tecnología del Plástico has dedicated its current issue to this event. It provides participants´ overview by sectors. The article “NPE2018: an event where packaging industry also takes leading role” highlights that PET Technologies will exhibit its automatic PET stretch blow molder APF-3002 as well as introduce its latest development, the 4th generation of machines APF-Max.

Download article

Source: Technologia del Plástico

Issue 2 – Volume 33 (April – May 2018)

Post date. 4-14-2018

Iveria Aqua to Install PET Technologies Automatic Blow Molder

… We were in Georgia, a Nobel Prize laureate Boris Pasternak wrote in his poem “The Waves”.

We were in Georgia: this is about PET Technologies collaboration with PET bottles manufactures in the country. One more project has been successfully carried out.

Iveria Aqua company launched a complete filling line with output 3000 bph (0.2 – 2.0 l) supplied by PET Technologies and Packing equipment plant “Thermo-Pack”.

It includes automatic blow molding machine APF-3002 to produce PET bottles.

The blow molder is equipped with air cooling system and 8-zone quick and intensive preform heating system. It guarantees uniform temperature distribution from outer to inner preform wall. It permits Iveria Aqua to fill water in ergonomic PET containers with original design.

Now the company produces 2 bottle formats – 0.5 l and 1,5 l – and fills them with natural mineral water.

Packaging design highlights product origin. The spring is at virgin mountainous village Natakhtari not far from the capital of Georgia, Tbilisi. Sheep at Georgian mountains slopes decorate the bottles, symbolize the country.

PET Technologies and Iveria Aqua joint project is a mixture of experience and innovations, advanced technology and natural wonders. 

Post date. 1-17-2018

Remsa Shares Its Opinion about PET Technologies Blow Molder

This year the Mexican company Recipientes y Empaques de México S.A. de C.V. with over 20 years in plastics industry has installed PET Technologies  automatic stretch blow molding machine APF-3002 with output 3000 bph (0.2 – 2.0 l).

Now our customer provides an overview of the project and describes his experience:

“As a consequence of our company Recipientes y Empaques de México (Remsa) growth and transformation, it’s been important to invest not only at infrastructure, but also at equipment and machinery to increase the bottles output to commercialize.

Worth to highlight PET Technologies automatic stretch blow molding machine APF-3002 we have purchased this 2017. The machine easily reaches its guaranteed output.

Since the project launch the supplier provides us all necessary support and timely follow-up that has built trust. Manufacture’s backing is essential to make such investment decision, especially when it is our first experience.

Remsa plant is equipped with the machines of different nationalities and trademarks, nevertheless, due to the quality and service we get today, we continue collaboration with PET Technologies to discuss further projects and new equipment purchase opportunities.” 

 Recipientes y Empaques de México S.A. de C.V. founded in 1994 now produces not only PET bottles, but also preform, caps and HDPE containers. Products line extension rubs shoulders with customization, special models development and pigmentation.

Advanced technology and personalized attention to each customer are common attributes for Recipientes y Empaques de México and PET Technologies. They lead to fruitful and mutually beneficial collaboration.

Post date. 11-30-2017

PET Technologies company Video

PET Technologies is a European developer and manufacturer of PET bottles blow molding equipment and blow molds.

We specialize in the following fields:

  • Manufacturing of automatic (3000-14000 bph) and universal semi-automatic blow stretch molding equipment for PET-bottles production;
  • PET bottles design and blow molds production for linear and rotary machines of other European manufacturers;
  •  Professional service support, sales and after-sales services; blow molds start-up
  • Complete filling lines supply

The plant was founded in 1999.

PET Technologies equipment is installed in 40 countries of the world. Sales and service centers operate in 15 regions. PET Technologies network covers Europe, Asia, Latin America, Africa, USA and Canada.

All the equipment range has been developed together with Austrian engineers and meets all the norms and directives of European quality standard CE and HACCP requirements for food industry, are issued 10 patents

Simplicity and uniqueness
Reliability and service
European quality and innovations

Enjoy watching!

Contact us for more details

Post date. 11-1-2017

PET Technologies to Supply Automatic Blower APF-3002 to Arion Company

Once Yoko Ono said: “You are water / I am water / we’re all water in different containers/ that’s why it’s so easy to meet”. PET Technologies and Arion companies collaboration (Devaytis TM)arose from water.

Not long ago a leading spring water company in the Western Ukraine launched automatic blow molding machine APF-3002 that enables to produce 3000 bph, 0.2 – 2.0 l. The heater is equipped with 8-zone temperature controland permits to produce asymmetric PET bottles with original shape.

PET Technologies supplied APF-3002 blower with a blow mold to form 1.5 l bottles for carbonated and non-carbonated water. We can not only enjoy fresh water, but also get aesthetic pleasure thanks to the bottle ergonomic design and its structural elements.

The bottle shoulders with the enforcement ribs resemble water flow through the underground rivers from the Carpathian Mountains and highlight its natural origin from the Devaytis spring.

Now Arion company – name and logo derive from the Ancient Greek myth – bottles water without additional filtration. It is nature that purifies it. The plant near the spring permits to preserve all medicinal properties. PET bottles blow molding machine positive environmental impact is obvious – it’s not necessary to transport empty containers polluting the atmosphere.

Post date. 8-9-2017

Automatic blow molding machine APF-3002 for PET bottles 0.2-2.0l, 3 000 bph

The innovative blow molder APF-3002 (3 000 bph, 0.2-2.0l bottles) is widely used by soft drinks and mineral water, juices and vegetable oils, milk and dairy products, detergents producers to have high quality bottle at low cost. The stability and output are guaranteed by:

  • unique patented mold closing system without analogs in the world permits to reduce time cycle for bottle formation and thus guarantee machine high speed performance;
  • preform intensive heating system with IR reflector lamps rating 1000 and 2000W;
  • 8 temperature regulation zones with option of independent deactivation to produce asymmetric packaging with
  • original shape;
  • minimum changeover time for another mold;
  • innovation air cooling system provides uniform temperature penetration through the preform body;
  • the machine is equipped with air recovery system with reuse of compressed air from high pressure system into
  • low pressure line to save up to 25% on compressor equipment investments;
  • compact and space saving design;
  • easy integration in automatic filling line;
  • CE and HACCP approval.

Post date. 7-17-2017
Our solutions for PET industry
PET Technologies company provides turn-key solutions for food and beverage industry manufactures (water, CSD, dairy products, edible oil, vinegar and beer), chemical industry factories (household and automobile chemicals) and bottle converters
Events calendar 2018
More h
Over 9000 m2
of our own
production areas
Read more
Get the update of
PET Technologies latest events
and project
Find out
Enjoy the benefits of our
technical support at all the stages
of cooperation
Contact us
Contact Us h